Preparation and precautions for initial use:
1.Check the operation of electrical, hydraulic, lubrication and control systems.
2.Verify the operation from low to high speeds and the idle travel of each moving part.
3.Within 200 hours of initial use, the weight of the machined workpiece shall not exceed 50% of the allowable load of the workbench. The maximum two-stage speed of the workbench shall not be used. The cutting force shall not exceed 50% of the maximum cutting force. All inclined iron pressure plates shall not Should be adjusted too tight, the ram should not extend too long.
4.Change the oil once after the first operation, and then change the oil once every three months or six months.
CNC lathes and turning centers are high-precision, high-efficiency automated machine tools. Equipped with multi-station turret or power turret, the machine tool has a wide range of processing technology, can process linear cylinders, diagonal cylinders, arcs and various complex workpieces such as threads, slots, worms, with linear interpolation, arc Interpolated various compensation functions and played a good economic effect in the mass production of complex parts.
“CNC” is an abbreviation for Computerized Numerical Control in English. The CNC machine tool automatically processes the machined parts according to the pre-programmed machining program. We process the machining process of the parts, process parameters, tool trajectory, displacement, cutting parameters (spindle revolutions, feeds, back-feeding, etc.) and auxiliary functions (tool change, spindle forward, reverse, The cutting fluid is turned on and off, and is programmed into a machining program according to the instruction code and program format specified by the CNC machine tool, and then the contents of the program list are recorded on the control medium (such as punched tape, tape, disk, bubble memory). ), and then input into the numerical control device of the CNC machine tool to command the machine tool to machine the parts.