CNC parts processing manufacturers! It's not that you don't have machine maintenance, but you don't ha

 CNC parts processing manufacturers! It's not that you don't have machine maintenance, but you don't have the right way!

  In CNC parts processing manufacturers, there are not a few machine tools that lack problems in maintenance, so we must pay attention to the maintenance of CNC machine tools.

The maintenance of CNC machine tools is divided into daily inspection, weekly inspection, monthly inspection, quarter inspection, and semi-annual inspection. CNC parts processing factory
Daily inspection:

The main projects include hydraulic system, spindle lubrication system, rail run system, cooling system and air pressure system. The daily inspection is based on the normal condition of the system. For example, check if the coolant in the coolant tank is sufficient and not enough to add it in time.


Weekly inspection:

Its main items include machine tool parts and spindle lubrication systems, which should be properly inspected weekly, especially for machine parts to remove iron filings and to clean external debris.

Monthly inspection:

Mainly for the inspection of power supply and air dryer, x, y, z three-axis track lubrication. The power supply voltage is rated at 180v~220v under normal conditions, and the frequency is 50hz. If there is any abnormality, it should be measured and adjusted. The air dryer should be removed once a month, then cleaned and assembled. The three-axis track surface must be well lubricated.

Seasonal inspection:

Mainly from the machine bed, hydraulic system, spindle lubrication system for inspection. For example, when inspecting the machine bed, it is mainly to see whether the machine tool accuracy and machine tool level meet the requirements in the manual. If there is any problem, you should contact the mechanic immediately. When inspecting the hydraulic system and the spindle lubrication system, if there is any problem, replace the new oil separately and clean it.

Half year inspection:

  After half a year, the CNC parts processing manufacturer should check whether all the keys are sensitive, the hydraulic system of the machine tool, the spindle lubrication system and the X axis. If there is a problem, replace the new oil and clean it.

  Under the premise of reasonable use, CNC parts processing enterprises should pay attention to the maintenance work of CNC machine tools, increase the capital investment in maintenance work, do the maintenance work of CNC machine tools, improve the service life of CNC machine tools, and guarantee the safety of CNC machine tools. Normal use.

Previous :How to understand CNC precision parts processing in 10 seconds ?
Next :How to improve the efficiency of CNC machining?

Online Chat
JavaScript is required for this website to fully function.